Cart and Log In

Can I Install A Float Switch In A Hazardous Area?

Mushroom cloud explosionNothing in our industry seems to cause more stress and headaches than complying with regulation. So it is with hazardous areas. Ensuring the safety of employees and protecting assets is extremely important. Still, navigating these waters can be challenging and, at times, confusing.

In our experience, most control engineers require that any device going into a hazardous location be certified with a hazardous approval. This may surprise some of you, but in some circumstances, a device with no certification CAN be installed in a hazardous location! While there are a few scenarios where this is ok, we will focus on the main one that concerns a popular device in our industry; the mighty float switch.

Intrinsic Safety

The key is to use Intrinsically Safe wiring methods to limit available energy.

The intrinsic safety technique allows for the installation of a “simple apparatus.” A simple apparatus is defined as a device that does not generate or store more than:

  • 1.2V
  • 100mA
  • 20µJ
  • 25mW

If it meets these requirements, it will have little affect on the intrinsic safety of a system. Some examples include resistors, junction boxes, semiconductor devices, and switches. This is what makes it possible to install them in an intrinsically safe system without requiring third party certification.

The reason for this has to do with the Intrinsic Safety technique. As a review, intrinsically safe systems never allow an ignition to happen in the first place. This is accomplished by using devices that require very low power voltage and currents. These devices are wired to barriers and isolators that sit between the power source and the hazardous area, limiting the power that flows through the hazardous area.

While many instruments have circuit boards and other components that condition electrical outputs, a simple apparatus does not. For example, our mechanically activated float switches simply open and close. All that is required is to supply the float switch with current and, depending on the position of the switch, the current is either allowed or not allowed to pass through. The output on the unit is directly correlated with the supply power input. Therefore, if the supply power is intrinsically safe, the float switch is intrinsically safe.

Warning!

A float switch represents little to no risk to a hazardous area. That said, adding anything to a hazardous area must be a calculated move. Make sure you are familiar with the instrumentation and wiring in your hazardous area, and consult with an electrical engineer who can safely assess the risk of modifying your installation.

Always use an appropriate barrier or isolator to control the power coming into your hazardous area and device. Failure to do so will compromise your safety, and that of everyone around you.

Yes You Can!

A float switch is a handy instrument that has yet to live out it’s usefulness – even in hazardous areas. So stop wondering if you can do it and get it done! Just do you homework while you’re at it.

If you have questions about instrumentation in hazardous areas, we’re happy to help. Contact us and we’ll quickly get the answers you need.


Need a float level switch in a hazardous area? We can help you with that! Check out our amazing float level switches below:

top photo credit: r0ckchuck via photopin cc

Blog Updates In Your Inbox

Contact Details

Phone
888-525-7300
435-753-7300
Fax
435-753-7490
Email
sales@apgsensors.com
Address
1025 W 1700 N
Logan, Utah
84321-1713
USA