Cart and Log In

Digital Pressure Gauge Function: Peak Hold

 

This video shows how to navigate to and use the peak hold function on the PG7 digital pressure gauge. Peak hold is used to display only the highest pressure measurement. This is a good way to cut out useless information when only the peak pressure is important.

 


Video Transcript

Hi and welcome to APGTV, I’m Shaw Merrill and today we are going to show you how to enable the Peak Hold feature on the PG7 digital pressure gauge.

To turn Peak Hold on press the On/Off button to enter the menu. Press the zero button to scroll through the options until you see P Hold on your display. Press the select button. Now press the zero button until you see On and press the select button.

To exit the menu, press the zero button until you see exit, and then press the select button. Now remember, when Peak Hold is enabled the gauge will display the peak or maximum reading since the gauge was powered on or the max/min was reset.

Thanks for watching our quick PG7 menu demo. If you still have questions contact us at 888-525-7300 or send us an email at sales@apgsensors.com. Until next time, I’m Shaw Merrill, APGTV.

Blog Updates In Your Inbox

Contact Details

Phone
888-525-7300
435-753-7300
Fax
435-753-7490
Email
sales@apgsensors.com
Address
1025 W 1700 N
Logan, Utah
84321-1713
USA