Cart and Log In

When to Use Light vs. Heavy Duty Pressure Transducers

Pressure transducers vary in designPressure transducers come in all shapes and sizes, and some are simply tougher than others. For example, our PT-400 is built for harsher applications than our PT-L1, and therefore costs a little more. So to avoid making the mistake of either spending too much on something you don’t need, or spending too little on something that doesn’t work, be sure to select the right sensor for the right job.

So when is it appropriate to use heavy duty pressure transducers vs. their light duty counterparts? Below is a basic list of factors to look for in your application that will help you make this decision:

Pressure Range

The higher the pressure range the more durable the sensor you will need. Typically, once you are experiencing pressure spikes exceeding 5,000 PSI you will be better off using heavy duty pressure transducers. If you never see much more than a few hundred PSI then you should be just fine using a more standard model.

Vibration

Quite often, pressure transducers will be used on large equipment that produce a lot of vibration. A good example of this would be on an oil rig or other equipment in the oilfield. In environments such as these it would be unwise to rely on a standard sensor. Heavy duty pressure transducers, like our PT-400, are built with thicker housings and were designed from the beginning to take a beating.

Extreme Temperatures

Many of our pressure transducers are used outside, exposed to the elements. And in many cases they are exposed to extremely cold temperatures. While a standard pressure sensor may be able to operate in these conditions it may fail to provide you with an accurate reading. Whereas a heavy duty sensor like our PT-400 is available with an extended compensated temperature range. This way you will still get an accurate reading when the temperature outside is 30 below (°F) or more.

Hazardous Locations

Finally, if you are working in a flammable environment, you will want to make sure you are using heavy duty pressure transducers. Our PT-400 was engineered to be intrinsically safe and it has the certifications to prove it. Using a sensor without these certifications is risky and may lead to disastrous consequences.

If you have questions on what pressure transducers to use in your applications please give us a call and we will be happy to help.


Ready to learn more about pressure transducers? The best way is to dig in and see what they're all about. Check out the best darn pressure transducers on planet earth below:

Blog Updates In Your Inbox

Contact Details

Phone
888-525-7300
435-753-7300
Fax
435-753-7490
Email
sales@apgsensors.com
Address
1025 W 1700 N
Logan, Utah
84321-1713
USA