|
|
|
Optional RS-232 or RS-485 communications |
|
PC calibration, diagnostic and data logging software |
|
PLC compatible (Modbus RTU) |
|
Horn, rod and high temperature antennas |
|
Simple installation and setup |
|
Unaffected by process temperature or humidity variations |
|
Automatic power and sensitivity adjustment to most tank conditions |
|
Rejection of unwanted echoes from stand pipes, tank walls and other small obstructions |
|
Correction for build up on antenna |
|
Measurement of very low dielectric constant materials |
|
Reliable operation in metal pipes |
|
Adjustable damping factor |
|
Programmable masking of unwanted echoes
|
| Pulse radar sensor transmits a
high amplitude burst at 6.3 Khz. The sensor will operate over long
distances with target materials that
have low dielectric constants. The
sensor automatically adjusts the
transmit power and receiver gain to
optimize the return signal to a level
that will give accurate readings and
not be affected by interference. The
sensor overcomes possible build up
on the antenna and avoids obstacles
that may be installed near the
detection path. It will also operate
reliably in metal stilling wells. Programmable software allows the
masking of unwanted echoes and
adjustable damping factors. |
|
