You're watching APG TV. I'm Shaw Merrill, and today we are going to show you how to program your LPU-2428 Ultrasonic Level Sensor to measure level using the LPU-2428 programming software.
00:12 PROGRAMMING TO MEASURE LEVEL
To begin programming the LPU-2428:
00:36 SETUP PARAMETERS
Now we are ready to set up the parameters.
These settings tell the sensor the dimensions for a level reading.
01:06 SETUP 4 TO 20
Now click the 4 to 20 setup button on the left menu and enter your minimum milliamp set point, this is the 4 mA setting and the maximum milliamp set point, the 20 mA setting. These can be the same as the full and empty distances or they may be different depending on how you want to use the outputs. Press the send button to save these settings and wait for the progress bar to complete. Your sensor is now setup and ready to go.
01:33 ADVANCED PROGRAMMING FEATURES
The remaining advanced features in the programming software will default to automatic settings. To change these settings, please refer to the LPU-2428 user manual programming section.
01:43 Thanks for watching our quick LPU-2428 programming demo.
Looking for more how-to videos to help you learn your LPU-2428 Ultrasonic Level Sensor? Check out our LPU-2428 Ultrasonic Level Sensor Playlist