Anti-Corrosion Coating For Use in Hostile Chemical Environments
With a chemical resistant coating and a Kynar® float, the MPX-E Chemical delivers precision measurements in corrosive, acidic and marine environments.
The coating on the MPX-E Chemical is designed for use in corrosive, acidic, and marine environments. It can withstand sulfuric acid, boric acid, hydrochloric acid, and sodium hydroxide.
The RS-485 Modbus RTU output makes the MPX compatible with any Modbus controller or PLC. It also simplifies wiring dramatically.
Tank Cloud Compatible
The MPX liquid level sensor is a Tank Cloud slave sensor, able to communicate via the Internet with the addition of an LOE Master sensor or an RST-5003 module.
Greater of ±0.04 in. (±1mm) or 0.05% of full range
Modbus: ±0.04 in. (±1mm)
4-20 mA: 14 bit DAC
Maximum Current Draw
Modbus: 25 mA
4-20 mA: 22 mA
Class I Division 1 Groups C & D T4 (Ta 85°C)
Class I Division 2 Groups C & D T4 (Ta 85°C)
Class I, Zone 1; AEx d IIB T4
Class I, Zone 2; AEx nA IIB T4
Ex d IIB T4
Ex nA IIB T4
4-20mA (Loop-Powered 2 wire)
Modbus RTU (RS-485) with optional Temperature output
Tank Cloud LOE Master
Optional RST-6001 USB to RS-485 converter
Factory set or optional RST-4100 programming module
Cast aluminum, epoxy coated
316L SS with chemical resistant coating
1 - 12.75 ft. (0.3 - 3.9 m)
1-7/8" OD Kynar®, 0.66 SG
-40° to 185° F (-40° to 85° C)
Maximum Operating Pressure
30 PSIA @ 70° F (21° C)