• NEW! APG MPI-T Intrinsically Safe Titanium Level Probe
  • APG MPI-T Intrinsically Safe, Titanium Stem Magnetostrictive Float Level Transmitter
  • APG MPI-T Intrinsically Safe, Titanium Stem Magnetostrictive Float Level Transmitter
  • APG MPI-T Intrinsically Safe, Titanium Stem Magnetostrictive Float Level Transmitter

Intrinsically Safe, Titanium Stem Magnetostrictive Float Level Transmitter

MPI-T

Big Time Anti-Corrosion and HazLoc Ratings For Big Applications

With a 1"∅ titanium stem, Class I Div 1 and Class I Zone 0 approvals, and floats that just don't get stuck, the MPI-T is built to conquer corrosive chemicals and hazardous locations.

Description

The MPI-T takes the fight to large-scale corrosive or acidic level-measurement conditions.

Anti-corrosion
The MPI-T is made specifically for use with Hydrogen Sulfide (H2S) and other corrosive liquids.

Modbus Output
The RS-485 Modbus RTU output makes any MPI compatible with any Modbus controller. It also pairs with the MDI controller to create a self-contained, Intrinsically Safe level monitoring solution.

Tank Cloud Compatible
The MPI liquid level sensor is a Tank Cloud slave sensor, able to communicate via the Internet with the addition of an LOE Master sensor or an RST-5003 module.

Common Applications
  • C I, D 1 Hazardous Locations
  • C I, Z 0 Hazardous Locations
  • Storage Tanks (up to 25 ft. measurable length)
  • Hydrogen Sulfide (H2S)
  • Corrosive Chemicals
  • Marine (Salt Water) Environments
  • Chromic (H2CrO4), Boric (H3BO3), and Nitrating (S15% H2SO4) Acids
  • Water and Wastewater Treatment
  • Pulp and Paper
  • Biotech
  • Chemical
Specifications
 

   Performance

Accuracy
Greater of ±0.04 in. (±1mm) or 0.05% of full range
Resolution
Modbus: ±0.04 in. (±1mm)


   Electrical

Supply Voltage
8-24 VDC
Typical Current Draw
Modbus (RS-485): 25 mA


   Approvals

CSA
Certificate: CSA19CA70219727
Ambient: -40° to 85°C
Class I Division 1, Groups C D T4
Class I, Zone 0; AEx ia IIB T4 Ga
Ex ia IIB T4 Ga
ATEX
Certificate: Sira 18ATEX2072X
II 1G Ex ia IIB T4 Ga
Ta = -40° to 85°C
IECEx
Certificate: IECEx SIR 19.0026X
Ex ia IIB T4 Ga
Ta = -40° to 85°C

   Connectivity

Output
Modbus RTU (RS-485) with Surge Protection
Internet Connectivity
Tank Cloud LOE Master
RST-5003


   Programming

RS-485
Optional RST-6001 USB to RS-485 converter
MND/MDI Modbus controller

   Physical

Housing
Cast aluminum, epoxy coated
Stem
Titanium
Stem Length
4 - 25 ft. (1.22 - 7.62 m)
Float Materials
Titanium


   Environmental

Operating Temperature
-40° to 185° F (-40° to 85° C)
Protection Rating
NEMA 4X
IP65