APG Introduces New Series MNU IS Intrinsically Safe Modbus Ultrasonic Level Sensor

MNU IS Intrinsically Safe Modbus Ultrasonic Level Sensor

LOGAN, UT – Automation Products Group, Inc. (APG) introduces a new ultrasonic level sensor, the Series MNU Is Intrinsically Safe Modbus Ultrasonic Level Sensor.

The MNU IS combines the flexibility and programmability of Modbus sensors with the ability to be installed in Class I Division 1 Hazardous locations. As with all of APG’s Tank Cloud compatible Modbus sensors, both the application parameters (Distance, Level, or Volume settings) and sensor performance parameters (Pulses, Signal Strength, Averaging, etc.) can be configured via APG Modbus software. And with certifications from CSA, IECEx, and ATEX, the Intrinsic Safety rating of the MNU IS is valid all around the globe.

APG Introduces New Series PT-405 Explosion Proof, Heavy Duty Pressure Transducer

APG's New PT-405 Explosion Proof Pressure Transducer

LOGAN, UT – Automation Products Group, Inc. (APG) introduces the new Series PT-405 Explosion Proof, Heavy Duty Pressure Transducer.

The PT-405 offers unbeatable performance in harsh conditions and hazardous locations. The PT-405 carries a Class I, Division 1, Explosion Proof rating from CSA, an IP65 rated case, and single seal construction for the highest safety factor. With ranges up to 30,000 psi, and outputs including 4-20 mA, 0-5 or 0-10 VDC, and RS-485/Modbus RTU, the PT-405 is as versatile as it is tough.


APG Introduces Three New True Echo™ Pulse Radar Level Transmitters

APG's New True Echo™ Pulse Radar Transmitter

LOGAN, UT – Automation Products Group, Inc. (APG) introduces three new True Echo™ Pulse Radar Level Transmitters: the Series PRL for Liquids, the Series PRS Dual Frequency for Solids, and the Series PRX Explosion Proof.

True Echo™ Pulse Radar Transmitters bring the unassailable accuracy of radar level readings to several difficult settings: liquids, solids, and Class I, Division 1 hazardous locations. All True Echo™ Pulse Radar Level Transmitters come with either a 50’ (15m) or 100’ (30m) range, an accuracy of ±0.25% of maximum range, and an output resolution of 6.1 μA.

APG Introduces the new MPX-E Chemical Magnetostrictive Float Level Transmitter

APG's New MPX-E Chemical

LOGAN, UT – Automation Products Group, Inc. (APG) introduces a new float level transmitter, the MPX-E Chemical Magnetostrictive Float Level Transmitter with a chemical resistant coating.

The corrosion resistant MPX-E Chemical brings you accurate and dependable level measurements in places where stainless steel doesn't measure up. The chemical resistant coating is designed for use in corrosive, acidic, and marine environments, such as: sulfuric acid, boric acid, hydrochloric acid, sodium hydroxide, and sea salt water.