APG Introduces Three New Digital Panel Meters

APG's Digital Display Panel Meters

LOGAN, UT – Automation Products Group, Inc. (APG) introduces three new analog-input digital panel meters: the Series DDD Din Mount Digital Display, the Series DDL Large Digital Display, and the Series DDX Explosion Proof Digital Display.

APG’s new Digital Display panel meters showcase your critical information where you need it to be seen. Each one features a two-line, six-character display with eight display intensity levels. With an accuracy spec of 0.3% across all three series, you can be confident that measurement sent to the panel meter is the measurement it will display. Every Digital Display panel meter accepts a range of current or voltage analog inputs, and comes with one discrete digital input. Any outputs, from an isolated 4-20 mA to two or four SPDT switches, is up to you.

APG Introduces the new Series FS-400 and FS-410 Stainless Steel Vertical Float Switches

APG's New Series FS-400 and FS-410 Stainless Steel Vertical Float Switches

LOGAN, UT – Automation Products Group, Inc. (APG) introduces two new float switches, the Series FS-400 Stainless Steel Vertical Float Switch, and the Series FS-410 Miniature Stainless Steel Vertical Float Switch.

The Series FS-400 and FS-410 are versatile switches, compatible with a wide range of liquids, temperatures, and pressures. They feature all stainless steel wetted materials, user-reversible logic function, and high operating temperature ranges. With max capacities of 60 W and 30 W respectively, the FS-400 and FS-410 can both handle up to 120 VDC or 240 VAC. Installation is simple with NPT mounting and a hex nut. The Series FS-400 Stainless Steel Vertical Float Switch and Series FS-410 Miniature Stainless Steel Vertical Float Switch offer set-and-forget ease of use in all the places you need them.

APG Introduces New Series MNU IS Intrinsically Safe Modbus Ultrasonic Level Sensor

MNU IS Intrinsically Safe Modbus Ultrasonic Level Sensor

LOGAN, UT – Automation Products Group, Inc. (APG) introduces a new ultrasonic level sensor, the Series MNU Is Intrinsically Safe Modbus Ultrasonic Level Sensor.

The MNU IS combines the flexibility and programmability of Modbus sensors with the ability to be installed in Class I Division 1 Hazardous locations. As with all of APG’s Tank Cloud compatible Modbus sensors, both the application parameters (Distance, Level, or Volume settings) and sensor performance parameters (Pulses, Signal Strength, Averaging, etc.) can be configured via APG Modbus software. And with certifications from CSA, IECEx, and ATEX, the Intrinsic Safety rating of the MNU IS is valid all around the globe.

APG Introduces New Series PT-405 Explosion Proof, Heavy Duty Pressure Transducer

APG's New PT-405 Explosion Proof Pressure Transducer

LOGAN, UT – Automation Products Group, Inc. (APG) introduces the new Series PT-405 Explosion Proof, Heavy Duty Pressure Transducer.

The PT-405 offers unbeatable performance in harsh conditions and hazardous locations. The PT-405 carries a Class I, Division 1, Explosion Proof rating from CSA, an IP65 rated case, and single seal construction for the highest safety factor. With ranges up to 30,000 psi, and outputs including 4-20 mA, 0-5 or 0-10 VDC, and RS-485/Modbus RTU, the PT-405 is as versatile as it is tough.